Vera Dining Chair in Metal

For a house that covers hotel restaurants, fine dining rooms, and country clubs, the Vera Dining Chair in Metal adds one more piece to match room by room. This one stays inside the house. Metal w wood look is what the frame is built from. Diners settle onto vinyl. For the room plan, the listing adds a rating to carry 500 lb, 22 lb for staff to lift and move, and padding for the guest's back. Take 24 1/4" W x 26 1/2" D x 32 3/4" H into the room plan before you place the next piece. The listed seat height is 19 inches. Compare the selected seat height with the underside of your counter or table, including its apron, and allow space to sit and move.

Choices to make for this piece: metal finish as Matte Black, Dark Walnut, or Natural; the vinyl seat, with 5 on the list including Black, T07 Sand, and T07 Dark Green. Allow each guest 24 inches along the table, 18 inches when the room is tight, plus 18 to 24 inches behind every chair. Count covers from those widths, not from the floor area.

Put the chosen version in a venue plan for the dining room, the bar, or the terrace, with its quantity. A version in your chosen upholstery takes longer to prepare, so order it early for an opening. Care follows the materials. Vinyl seats clean with a cloth and soapy water, followed by a dry towel; bleach and solvents harm the cover. Check metal frames for chips at changeover and seal them before water gets beneath.